Product introduction:
HDM-DAJ synthetic screw air compressor oil adopts synthetic hydrocarbon base oil, and is added with antioxidant, antiwear, antifoaming,
It is made from a variety of high-performance lubricating oil additives such as rust prevention and corrosion protection. Oil products have excellent thermal oxidation stability, oil-water separation and wear resistance.
Application scope:
HDM-DAJ synthetic screw air compressor oil is suitable for lubrication and cooling of medium and heavy load screw air compressors and variable displacement compressors. The recommended service life is 8000 hours.
Performance characteristics:
Excellent oxidation stability and thermal stability;
Very low tendency of carbon deposition;
Strong oil film retention;
Good oil-water separation;
Excellent corrosion resistance and rust resistance;
Technical specifications:
- ISO 6743/3
Typical data:
|
Item |
HDM-DAJ Synthetic Screw Air Compressor Oil |
Test Method |
||
|---|---|---|---|---|
|
Viscosity grade |
32 |
46 |
68 |
|
|
Kinematic viscosity (40℃), mm2/s |
32 |
46 |
68 |
GB/T265 ASTM D445 |
|
Viscosity Index |
140 |
140 |
140 |
GB/T2541 ASTM D2270 |
|
Flash point (open), ℃ |
220 |
230 |
240 |
GB/T267 ASTM D92 |
|
Pour point, ℃ < |
-50 |
-50 |
-50 |
GB/T3535 ASTM D97 |
|
Anti-emulsification (40-40-0)min < |
10 |
10 |
10 |
GB/T7305 ASTM D1401 |
|
RBOT@150℃, min ＞ |
2000 |
2000 |
2000 |
SH/T0193 ASTM D2272 |
|
Foamability (foam tendency/foam stability) ml/ml 24℃ 93.5℃ After-24℃ |
10/0 10/0 10/0 |
10/0 10/0 10/0 |
10/0 10/0 10/0 |
GB/T12579 ASTM D892
|
Note: The above data are the measurement results of representative styles, and the product performance is subject to the actual measurement.
Caution:
According to the equipment oil regulations, select the oil with appropriate quality grade and viscosity grade; The storage container must be dedicated, and it must be waterproof, moisture-proof and prevent mechanical impurities from mixing during storage and transportation; Prevent foreign body pollution; To prevent mixing with other oils, different types of lubricating oil shall not be mixed.
Packing: 200L iron drum and 18L plastic drum.
