Product Introduction:
HDM-Industrial open gear oil starts with a high-viscosity base oil and then adds various functional additives like extreme pressure, anti-wear, anti-rust, anti-corrosion, anti-oxidation, water-proof, and so on. It is specially modulated for open industrial gears and can withstand heavy loads, shock loads, water showers, and other multifunctional gear oils. The unique process formula causes the gear oil to stay on the metal surface for a long time and is difficult to slip off, effectively protecting the metal surface of gears and resisting the erosion of foreign pollutants, dust, and water.
Performance characteristics:
Extreme pressure protection performance: Industrial open gear oil has excellent extreme pressure protection performance, which can protect gears from wear and corrosion under high load and high pressure.
High temperature resistance: Industrial open gear oil can maintain its performance at high temperatures and will not deteriorate or fail at high temperatures.
Anti-foam performance: Industrial open gear oil has excellent anti-foam performance, preventing the formation of bubbles and foam during gear operation.
Long life: Industrial open gear oils are specially formulated to maintain their performance over extended periods of use, thereby extending the life of equipment.
Application scope:
HDM industrial open gear oils are suitable for use in extra large rotating equipment such as rotary kilns, ball mills, dryers, etc., slow running open gears and stationary or slow running steel cables.
Typical data:
|
Item |
HDM-Industrial open gear oil |
Test Method |
||||
|---|---|---|---|---|---|---|
|
Viscosity grade |
680 |
1000 |
1500 |
2200 |
3200 |
|
|
Kinematic viscosity (100oC), mm2/s |
680 |
1000 |
1500 |
2200 |
3200 |
GB/T265 ASTM D445 |
|
Viscosity Index > |
100 |
100 |
100 |
100 |
100 |
GB/T2541 ASTM D2270 |
|
Flash point (open), > |
230 |
240 |
250 |
260 |
280 |
GB/T267 ASRM D92 |
|
Pour point, < |
- 9 |
-5 |
-3 |
-3 |
-3 |
GB/T3535 ASTM D97 |
|
Corrosion test, grade (copper sheet) 100 PD, 3h |
1b |
1b |
1b |
1b |
1b |
GB/T5096 ASTM D130 |
|
Liquid phase corrosion test (synthetic seawater) |
No rust |
No rust |
No rust |
No rust |
No rust |
GB/T11143 ASTM D665 |
Note: The above data are the measurement results of representative samples, product performance is subject to actual measurement
Caution:
According to the regulations of oil for equipment, choose the oil with suitable quality level and viscosity level; the storage container must be dedicated, and the storage and transportation process must be waterproof, moisture-proof, and prevent mechanical impurities from mixing; prevent foreign body pollution; prevent mixing with other oils, and different types of lubricants must not be mixed.
Packing: 200L iron drum, 18L plastic drum
