Product Introduction：
HDM-HG hydraulic guide oil is made from highly refined base oil that has been carefully modulated with anti-wear, anti-wear, anti-oxidation, anti-rust, and anti-corrosion additives. This product is a combination of hydraulic oil and guideway oil performance, allowing the machine tool to reduce vibration to a bare minimum while maintaining low vulgarity.
Application scope：
HDM-HG hydraulic guide oil is suitable for general low and medium pressure hydraulic system and hydraulic and guide rail for an oil circuit system of precision machine tool guide lubrication.
Performance characteristics：
Excellent friction reduction performance, allowing the machine tool to operate at low speeds with minimal vibration or intermittent sliding Stick-slip.
Excellent anti-oxidation and anti-rust properties, extending equipment service life.
Excellent anti-foaming and air release properties ensure that the hydraulic system operates sensitively, precisely, and smoothly.
Excellent compatibility with all types of conventional sealing materials.
Technical specifications：
- GB 11118.1-2011
- ISO 11158：2009
Typical data:
|
Item |
HDM-HG hydraulic guide oil |
Test Method |
|||||
|---|---|---|---|---|---|---|---|
|
Viscosity grade |
32 |
46 |
68 |
100 |
150 |
220 |
|
|
Kinematic viscosity (40℃), mm2/s |
32 |
46 |
68 |
100 |
150 |
220 |
GB/T265 ASTM D445 |
|
Viscosity Index |
130 |
130 |
130 |
130 |
130 |
130 |
GB/T2541 ASTM D2270 |
|
Flash point (open), ℃ |
200 |
210 |
220 |
230 |
240 |
250 |
GB/T267 ASTM D92 |
|
Pour point, ℃ < |
-20 |
-20 |
-20 |
-15 |
-15 |
-15 |
GB/T3535 ASTM D97 |
|
Stick-slip characteristics (coefficient of dynamic and static friction difference) |
0.05 |
0.05 |
0.05 |
0.05 |
0.05 |
0.05 |
SH/T0361 |
Note: The above data are the measurement results of representative samples, product performance is subject to actual measurement
Caution:
According to the regulations of oil for equipment, choose the oil with suitable quality level and viscosity level; the storage container must be dedicated, and the storage and transportation press must be waterproof, moisture-proof, and prevent mechanical impurities from mixing; prevent foreign matter pollution; prevent mixing with other oils, and different types of lubricants must not be mixed.
Packing: 200L iron drum, 18L plastic drum
